Arc'teryx - Beta Glove - Käsineet

219,95
sis. alv
Väri:
Valita väri:
Väri:
Valitse koko:
Koko:
Toimitusaika: 4-6 arkipäivää

Valitse ensin malli!
Kirjaudu sisään

Olet jo Bergfreunden asiakas, joten voit kirjautua tästä sisään.

  • Lähetyskuluitta alk.€ 50
  • Nopeat lähetykset
  • 30 päivän palautusoikeus
  • > 250000 tyytyväistä asiakasta
  • Kaikki tuotteet varastossa
Attribuutit & ominaisuudet
Kenelle:
Rakenne:
2-in-1 glove
Käyttöalue:
Skiing; Snowboarding; Mountaineering; Mountaineering
Ulkomateriaali:
N70p 3L Gore-Tex (back of the hands); N333p-X 3L Gore-Tex (finger); TPU laminations
Sisämateriaali:
removable liner made of Cetus high loft fleece (100% polyester) and Cobblecomb (94% polyester; 6% elastane)
Paino:
210 g (medium size)
Koot:
XS-XL
Muuta:
Drawstring in the waistband; centered adjustment; detachable leash TriDex design
Tuotenro:
202-1447
Tuotekuvaus
Gloves for ambitious skiers and alpinists: The Arc’teryx Beta Glove!
On this glove model waterproof, robust outer gloves were combined with soft, insulating fleece liners. The inside gloves can be removed, which makes it so versatile. It can be used for skiing, mountaineering and on alpine tours. On top of that the outer gloves serve as cover for the (emergency) weather protection over softshell- or synthetic gloves and can be packed into small size. The cosy fleece liner can be used for every day or can be worn separately when walking.
The inside gloves consist of long-fibre fleece and has a perfect proportion of weight and insulation. It absorbs sweat perfectly and thus ensures a pleasant wear comfort. The inside gloves are cut shorter than the outer gloves. The liner goes all the way to the wrist. Flat seams enhancing the wearing comfort.
The outer gloves of the Beta Glove have been designed very extravagant and of high quality. Using the 3-layer Gore Tex laminate for abrasion-resistance and permanent weather protection. A thinner outside material was used on the palm area for better dexterity. The fingers are preformed and adapt perfectly with the natural outlines of the hands, due to a special seam tracking called TriDex. The gloves were seamed and taped on the inside in order to have the least vulnerable areas, where it could tear open after lengthy, intensive use.
The reinforcements of the laminate coated TPU make it not just more robust but also enhance the grip. The cuffs are big enough to wear the Beta Glove over the jacket’s sleeve top. It can be easily adjusted with one hand on the wrist as well as on the sleeve top. If not using the outer gloves but still having it ready at all times without having to store them away or avoiding to lose them, there is a removable loop which can be attached to the wrist.
Rediscover versatility with the Beta Glove made by Arc’teryx!

Kysy asiantuntijoiltamme!
Bergfreund-asiakas Christian

+49 7121/70 12 0

(ma - pe klo 10:0017:00).

Mitä mieltä olet?

Enimmäismerkkimäärä on täyttynyt.

Hups, unohdit kirjoittaa kysymyksen.

Arvio vielä tuote napsauttamalla tähtiä

Arvio vielä tuote napsauttamalla tähtiä

Millaisen arvion annat tuotteelle?

Lataamalla kuvat ilmoitat samalla hyväksymäsi käyttöehtomme